Thanks for all the reply's guys!
Type: Posts; User: IBFISHIN
Thanks for all the reply's guys!
Does anyone know or have experienced hitting a rev limiter on a 250 SHO? Asking because I was seeing 6300 on my Tach the other day and I didn't feel, hear,or see anything that would make me think I...
All, thanks for the reply's. Randy T, the research I have done says that the Hbirds don't give you fuel used/fuel left which is ultimately what I'm looking for and the LMF-400 would. For those that...
Has anyone ever tried to use a Lowrance LMF-400 to obtain fuel used or fuel flow on a SHO? I know that one can connect the SHO to a NEMA nework as several have using their Lowrance Depthfinder/GPS...
I had almost 500 hours on my 2011 when I traded it in a month ago. I only had two issues with it the whole time I owned it. 1. The lower unit locked up on me and was warranty replaced and 2. the...
I always look and the step in front of the wheel well. I back the trailer in so that the step is half covered in water for average pitched ramps. For steep ramps the step has to be all the way out.
I talked it over with Jeff @Phoenix and he was saying the same. I currently have a 721 with a 10 on the back and I ordered the same boat and motor but now with a 12. Will report back after the wait...
Anyone have experience with a 721 with a 12" jackplate? Ordered a new 721 and thinking since I ordered it with a 36V TM and 360 sitting on the bow it might be good to have a bit more leverage than a...
My 2011 250 SHO had this exact issue in the last year or so. Had approx 400 hrs on it when it started bogging down intermittently. First pass was the filters in the VST were clogged with a black...
If you are wanting to do a shock treatment, use 1 oz of Ring Free or Seafoam per gallon for 25 gallons. Then switch to the maintain amount of 1oz per 10 gal. for the remainder of ownership. If the...
Who's got the best pricing on new Mercury props these days? Always seems that boat dealers are the highest.
Thinking about trying 360 on a new boat. My current rig has SI up at the bow and I like it but I'd like to be able to see/follow schools of fish moving around me and I'm thinking 360 would assist...
Lower unit was covered. Not sure about current issue. Called dealer today and found out that both fuel pumps are bad and that there is some material(they suspect graphite from the low pressure...
My 2011 250 SHO currently has 416 hrs on it. It's had a flawless service record until this year with a LU carrier bearing lock-up this spring and currently in the shop for a non starting issue. It...
Mark, have you figured out what the cost difference of repairing a "blown engine" would be between the Etec and SHO? I'm guessing there isn't much. Everyone here has good and bad stories and...
Congrats! Glad to see another Phoenix in the area. If I see you on the Miss. River I'll stop to say hi. I'll be in my 721 w/SHO.
Remember guys, the gas tank is L-shaped. The short leg of the of the L is under your seats. So, when the sending unit float gets down to the widest part of the tank the gauge is no longer accurate....
Congrats! Can't wait for a test ride. It's your turn now. http://www.bassboatcentral.com/boardstuff2/beers.gif
I have a 788 H-bird flush mounted up front and started with a flush mounted 998 H-bird in the console. I had to move the 998 to a ram mount off to the side. I was getting a tremendous amount of...
Guys, has anyone tested Precision Propellar's FXP prop on this combo yet? I thought that the prop was going to be out a month ago and I haven't seen anyone post about it as of yet. If anyone has...
Please, Please, Please report back on your findings with this prop. I too am very interested. I ran one on a previous boat and really liked.
Mine came off and I experienced the exact same symptoms you are having. Just open up you dash panel and push the speedo tube back on the back of your speedometer and then install a zip tie/wire tie...
I have tried a 25P Fury, 25P Tempest, and 24P Razor 4 in addition to my 25P B&B Ventless T1. The Fury was slower, the Tempest was close but still 1-2 MPH slower, the Razor ran identical RPM and only...
I was at the factory a couple of months ago and this subject came up. I was told that they are now using a new material in the area that the rubrail screws into that will not allow the screws to...
Mine's a 6' and it starts just under the bottom bow wing. Haven't beached it much as of yet but it seems to be properly mounted in the right location....