Search:

Anyone done this before? I'm considering putting two on the back of my boat and i think the main question is will they be effective in really cold weather i.e. 20degrees F or so. Concerned they may...

I'm looking for just the middle section of the below ram mount. I have the short version but need the medium version to extend my graph up another inch or two.


Here is a link for reference:...

Bought a new skeeter wx2200 and put a 112lb 36 volt Ulterra on it with a sliding quick release bracket. If i mount the nylon strap under the quick release bracket, there isn't enough strap to go...

Thanks for the quick reply. Ultrex is the ILINK. So it will work even though I don't have the Ultrex deployed?

If i have a new ultrex with the puck, do i need this puck as well so i always know which way the front of the boat is facing?

Anyone help with what UHF radio i can connect to this unit and how i do it? Interested in seeing AIS on the chart and having DSC if something happens. Thanks!

Can anyone help me out and how to connect these two so I can use the camera on my display?

Quick question I'm looking at replacing an HDS3 12 on the console that went bad with a elite ti2 12" unit.

I have an HDS gen 3 12 on the bow.

What are the limitations as I've read delete TI-2...

Can the ti2 connect to the carbon so chart, sonar, waypoints do/si etc can be shared?

Since ti2 doesn't have Ethernet and only nmea, is it possible to do wirelessly?

Also, the ti2 has a plug...

Thanks for your reply. Do you know where an accurate calculator is?

For the experts...does this calculator look accurate?

I took one out but it was <5% of my balance and so why not. I pay myself back at 5.75% which is a good return over the long run. The key for me is that it was a small % of my portfolio and...

I just financed part of a boat and lendingtree provided good rates. Boatloan.com is another good place. I ended up going with my local credit union which was 4.75% for 96 mths. about as good as it...

Dealer says that the vrod has a built in motor toter. He flips a bar in the center of the tilt trim and says to use that.

I would call it the shallow water bar in most motors. Is it true that...

So I'm picking up my new triton 216 with this motor this Saturday. I live in Iowa and the water temps up here are mid 30's. I want to break it in on the ride back from the dealer. I think it's a 2...

ot343859

Motor will go into forward without issue. When I try reverse it makes an awful grinding noise and doesn't engage. Where to start?

#OT343859, 2001 150L Opti

Dealer tried to run codes off the motor and said it wouldn't allow viewing of the freeze frame faults? Any ideas on what causes this and how to fix it?

They were...

Serial # 0T343589

I bought a duck boat with this motor on it and it has 256 hours on it. Not sure what i should be checking on this motor to ensure it's ready to go this fall.

Here is what...

not 100% sure but i'd say 2800 seems like it starts grabbing water good. I can check this week. What are you thinking? At this point, i'm game to just start replacing parts.

Sad to report that the issue came back this weekend. Here is the variable that is causing the issue....when the 50 gallon livewell is full and another person is in the boat, the motor will sound...

It's on a Ranger 621vs that I've had for 3 years now and it's never done this before.

i should add that i was only able to buy 91 octane w/o ethanol if that matters...

2010 merc 250 pro xs.
1b787281

So I just had a head cover replaced due to a tiny crack in it. Fishing a tournament this weekend at wide open throttle which is around 5750 RPM I could see the...

http://www.bbcboards.net/attachment.php?attachmentid=236731&stc=1

any idea where it goes on a 2010 250pro xs? the rubber piece...

Progressive covers the lower unit only.

Progressive propulsion plus