Search:

Not likely assuming you just disconnected it and reconnected it.

I don't usually post fishing videos on this board but wanted to share this one from yesterday's trip to nearby American Lake in western Washington. Please help to support my channel by liking and...

The Point-1 normally comes with a 15-foot cable and one tee.

You should get a NMEA2000 starter kit which comes with a power node with Tee, and two 2-foot drop cables with Tees, a 15-foot cable...

This ^^^^. Try stopping your SideScan and DownScan and see if the lines go away. If this is the case then a hole shot plate or different mounting location will fix your problem.

Your transducer mounting looks correct in that photo, so that rules out that problem. Let us know if you get it working!

Great job on the video showing the quality of your build! Looking forward to using one!

I leave mine on all the time; suspect it does use a little more power but I do not know this for a fact, nor does it concern me.

Frankly it looks like your transducer is weak. I would have thought a hard reset would have fixed it, but apparently not. If you have a different ethernet cable try that; also check all your...

Probably not the answer you wish to hear, but one to consider regardless; you can run both without crosstalk from the other, but only if you have one pinging and not the other.

Still useful to...

:beers:

BTW, since your boat had a prior AT1 you will need to "restore defaults" on the unit (PRO/LIVE/Carbon?) so that it reads the AT2.

Have you updated all the units (head unit and AT2)?

Certainly...

Help us help you. We need to see what you are seeing.

Take a couple of moments and view this video about taking screenshots, and then post a screenshot of what you are seeing. Then we can help. ...

No.

You are welcome, grasshopper! Glad you got it working again.

This ^^^, and I will add to make sure all units have their most recent update.

Lowrance provides leveling rubber washers that you can use. There are also wedges that you can install from companies like Ashmore. By making sure your mount is level and your trolling motor shaft...

I am not a fan of trusting a Ram Mount with my electronics (they can work loose, especially with age) and in rough water your graph can slam down. I went a different route as you can see in this...

I prefer to run my house battery on its own master cutoff switch, which is located right next to my starting battery cutoff. That way I keep both circuits separate so interference from an aerator,...

So if you are seeing further out in deeper water and not in shallow water, the first thing I would suspect is that your transducer geometry is off. Picture aiming a flashlight down at the ground at...

Yes, update all.

Watch my YouTube videos (@marcmarcantonio).

All need to be on the current update version. Start there.

Yes, reload the update again and perform a hard reset. You should be fine.

FYI, your electronics are on your "House" battery; vs. your "starting" battery which powers the outboard, livewells and lights.

Try moving your transducer height closer to the surface of the water.