Im running a bravo 1 fs pm me if you want some details...
Type: Posts; User: coloblt
Im running a bravo 1 fs pm me if you want some details...
Same here, my 2017 z185 held 3700's horizontally, my 2019 z519 will not...
Drewtick has hepled me out on both my rangers, he even sent me 2 diffrent center rollers on my new boat to make shure I had the correct one. They are a great upgrade!
Thanks for the advice. By the way jaco was awesome I called them and they took care of me in about 2 minutes. Had it in the mail with a tracking number in about an hour...
Are there any major diffrences other than the vent holes?
I am running right at 6000 with my tempest plus 22
Hello I have a 2019 ranger z519 with a 225 pro xs 4 stroke. I am at high altitude in Colorado and am running a 22 pitch tempest plus right now. Been doing alot of reading and am wanting to try a...
Very nice!
Thanks for the reply, I new see a few other posts on this exact subject. I put 6 quarts back in... Thanks...
2B647142 2019 225 pro xs. im doing my 20 hour break in service. I know my motor takes 7 us quarts per the manual. My issue is when I drainded my oil it had more like 7 1/2 quarts in it. Should i be...
+1 drewtek
I use best boat tie ups for my 519, they are awesome you dont need dock bumpers with them, i have both a set of 15 inchers and a set of 30 inchers depending on the dock im at. Tackle warehouse has...
Have you considered the non L model 518 now with 200 HP rating, this would save you some money over the L model. I cannot speak for a nitro but when I was shopping the biggest thing that stuck out to...
Nice! Love red and white!
I have fished out of a 117, and I owned a 2018 z185, I felt like there was a pretty big difference between the two. I really liked my z185. To me the foot longer and 35 extra horse power makes a big...
379511
My 2020 z519
I wish I had ordered my boat with the traction pad. Oversight when I ordered my boat...
Congrats on the new boat. I had a z185 two years, they are great boats. Honestly I wouldn't expect a whole lot more than 56mph with your 2 power poles. At lower elevations mine would barley get 60...
I belive my jump switch is in fact wired incorrect (wired to the high side battery) so now my question is, has there been damage done to my ultrex with the electrolysis?
I belive my jump switch is in fact wired incorrect (wired to the high side battery) so now my question is, has there been damage done to my ultrex with the electrolysis?
Will do
I firs posted this on the ranger forum, I'm getting galvic corrosion on my th marine prop nut. Could it be that my univrsal sonar is running off the 12 volt cranking battery thru the bow graph and my...
So, my fuse in my motors head is not blown, when I put tester on my trolling wires I'm getting 25 volts, my cranking battery 12.5, I'm not getting any readable volts to the external parts of the...
I have a z519 with an ultrex with the MDI transducer built in, my boat has 10 hours on it. I put a th marine eliminator nut that was on my old ultrex on my new motor. Today I was cleaning my boat and...
Very sharp! Good choice...