So I recently applied for a loan through USBanks for a boat in the amount of $22,700. My payments were approx. $250/month and I paid $275 each month. After five months in I decided to see how much my...
Type: Posts; User: chsapeak
So I recently applied for a loan through USBanks for a boat in the amount of $22,700. My payments were approx. $250/month and I paid $275 each month. After five months in I decided to see how much my...
They got me for $48,000... Anytime I'd ask when my boat was going to be started, I got a song and dance. I'd even purchased my own 250 Pro XS and had it delivered there as they were telling me they...
Can I use a vessel view link to display engine info from my 2010 Pro XS to my Lowrance HDS 9? To me it appears it's only 2016 and newer engines
Looking for the pre 2019 gauge for my 2010 set up. Apparently Bob's list the units made after 2019 as having a "digital chip" and will not work with my 2010 unit. appears everything prior to 2019...
If the cranking battery and your electronics battery are sharing the same "multi" bank charger, you may be getting noise transmitted through that. Unhook the pos and neg from the charger to the...
I did search for them none say "fits Bravo" are they all the same size?
Anyone have the part number for the vent plugs for my Bravo 1 XS?
So I just installed a 28P Bravo 1 XS on my 22' Sterling I'm running a 2010 250 Pro XS 2 stroke. When I punch it to get out of the hole, I slips alot. I have to really try hard to get up on plane. As...
Thanks Guys... Any place I can get it other than "Bobs" website? Shipping is $18 to NY That's INSANE!! for a quart of oil
Please delete, did not see I'd already posted it here
One of these..
My local dealer sold me Mercury Power Steering fluid to top off my Power Pole system. Told me it's what I should use. What do you guys think? It's 0W-30 full synthetic I'd also like to top off my...
11/8 Update.. Narrowed it down to the speedometer. If I unplug it from the harness everything works fine, vessel view lights up and tach shows data. Turn the key off, plug speedo back in and I get no...
If you get one without holes make sure you measure and dont just put them back to back and mark the holes. Seen a buddy do that one time and they were slightly off. Think about it he was transferring...
how tall? I may have some
I'm on to it now!!!! So this morning while still in possession of a working PCM I decided to rehook the "new" harness from the 14 pin to the helm (laying it on the deck of the boat) This time my...
UPDATE SILL NOT WORKING..... "Lost Motor Com" Error on both gauges.... Unplugged and cleaned with electrical cleaner every plug from helm to engine several times, checked fuses on engine (6 total )...
I never even cranked it over, just turned the key and when I got no alarm beep I looked over at the battery and seen what I did.
So I'm about to dig into the boat again today, but in the meantime I noticed my jackplatte gauge was not illuminated when key was on. I found a blown fuse and when I installed the new one, it popped...
My bad... The "fuel wire does not come from the 14 pin its cut out of a smaller harness and was/is a pink with black stripe. I've attached a few pictures.. In the last pic it appears to have been cut...
To refresh , here's the scoop. When I purchased the boat everything supposedly worked with no past issues. When I received it at my home 1500 miles away I began to go through it cleaning and changing...
I called and they said it was not changed from starboard. Is there a starboard and a starboard "outside"? I'm wondering if my tach which is my master is messed up, if so, will that bugger up the...
Got my ECM back $800 later after shipping both ways, hooked it up, installed the battery and turned the key to find "LOST MOTOR COM" did a master reset and "no starboard engine found" Tried my...
Hopefully I'll be running my boat this week and need to know what my max rpm's are 2010 250HP ser# 1B779189 I thought or at least believe its a racing version
Looking for the Hexagon style basscat steering wheel.