Search:

I hate to post this question. I have a Smart Craft that i tried calibrating the trim and now rmp shows numbers when the engine is not running and the hours don't appear when you turn the key on. All...

First question is best net for the net storage. Second question what size lug nuts on the trailer . I need thin wall socket?

Thanks in advance

I have a 1999 Evinrude ficht. I took the lower unit in for service. They reported back that the prop shaft has burrs , that's the cause of the seal failure. They recommend new prop shaft. My question...

Update:I did a fuel flow test. The spec is 20gal hour or if I did my math correctly 15 seconds = 10.66oz
Flow test from boat tank was 5oz for 15 seconds . Flow test from external tank was 7oz for 15...

Model E200FPLEEN Just over 500 hours . cylinder compression range from 125LBS to 135lbs
Engine is on a Stratos Pro Elite 295.
Engine slow to rise through 4000rpm to 5500rpm, when back down to...

I will be fishing this weekend for second time on a Lund pro V 18 bass . Has 4 seats. Very worthwhile to check out. I have a Stratos 295 Pro Elite. I think this Lund will be very successful as a...

FLW has it all wrong. All the boat that passed them when they were in the water should be disqualified. These individuals that drove by lack character. When catching fish is more important then human...

Thanks for the reply. I will swap out the spark plug wire to confirm condition . The problem with the coil is they are buried behind the injectors. I am trying to determine the condition of the coil...

First of all thanks to everyone . I have had this motor since 2000 and its been great. Very few problem until now. Early spring I replaced the oil lift pump and the engine has been running strong ....

Thanks. I will check the oil tank out. I did survey all the lines and they looked good. Did not mention before the engine has only 498 hours and boat and engine are garage kept. Thanks for your help.

I have the part being delivered tomorrow by a friend new in the box. An amazing story of coincidences . Any precautions I should be aware of on the install? And should I replace the pressure...

1999 Ficht 200
Model No E200FPLEEN Serial 4712814
Been having a problem with my motor for the past two years. The engine keeps throwing code 35. For the past two years I have been fishing no...

Yes. All 4 lights go on then off one at a time top to bottom followed by a beep when starting the engine . As far as the second question I am not sure I understand the question.

Thanks for the response . I do have a system check but no light illuminated when the buzzer went off. Is this something a trained tech will be able to identify.

I have a 1999 200hp ficht with @460 hours(Stratos 295 pro elite). This engine has always been a strong running dependable engine. Always keep up with maintenance and with everyone's help last year I...

http://www.bbcboards.net/attachments/bbc-lounge/141335d1416520536t-6-free-baits-up-grabs-gandy-lure-co-gandy1.jpg

Thanks everyone for your reply. I ordered the part and going to replace the fuel manifold myself. One last question, what is a exhaust sensor tube? Will it need maintenance? I have seen this on past...

The fuel pressure check valve has gone bad and spraying fuel. My question is can this valve be spliced out or clamped as a safe fix or do I need to replace the with a new manifold assy. This engine...