Search:

Thanks

Hey guys, I just purchased a 126SV for bow on a precision sonar over / under mount and am concerned about the bail mount releasing in rough water? Has anyone found a fix for this? I saw some clips...

Thanks all, I lubed the lock and it opened…must have been a stuck tumbler in there from riding in rough conditions…

I have been using for about 6 months without issues now the lock won’t unlock…tried all 3 keys…luckily the bar was not on my boat at the time or I would have been in a jam! TH marine replaced the...

I had a similar issue on my 2019 521L…mine has the optional second recirculate / pump out selector switch and it was not completely switched to recirculate…with the location of this selector switch...

+1

Both thru hull and TM are 10 degrees high

My trolling motor and hull temp sensors are reading 10 degrees higher than other boats on the same water? Any suggestions? I have 2019 12/16 LIVE units with most recent software updates installed....

Got it

Got it

Trying this and not working???

I am switching to a fury 4 from my fury 3 and the hub will not easily come out...any tips on how to knock it out? Thanks!

Thanks for the info...FYI the eBay link in your end cap post does not work but I was able to find them using item #

171953644502

Old boat, had a run in with some waves on Erie!

Thanks guys! Does anyone know how to fix this post so the pictures come on instead of the links???

Thanks to the fine folks at Angler's Choice for all your help with my new boat! This one is the Blackout Limited Edition loaded up with Merc 250 ProXS, 24 Fury, Atlas hydraulic plate, Lowrance T12...

Top notch quality and service!

My previous rig was a 2015 521c same setup and I could turn 6000 rpm with the 24 Fury and 73 mph by myself...the JP gauge was best at 5...I miss that boat! I have a 2016 520c and run a 25 Fury with...

I am a 'Pro-motional Staff' member of Ranger Boats and my 2016 Z520c / 250 ProXS Blackout edition will be ready for sale at the end of July...the boat will have about 60 hrs and has been fished in...

Nice Trent!

Does anyone have a trick to making the lid to the battery compartment easier to lift open? The only way to get mine open is to open one of the side lids then pry the battery lid open from...

Check out the 'Blackout' limited edition 2016 Z520C...loaded up with Merc 250 ProXS, 25 Fury, Dual PP 8ft blades, Lowrance 12T and 9T on Precision Sonar mounts, Atlas Hydraulic Plate, Minn Kota...

Looks like 16 inches is the recommendation - thanks! Also does anyone know the tongue weight of the 520c???

Guys - two questions...does anyone know the suggested height off the pavement for the ball mount to be set at? I have heard 13 inches but wanted to confirm...Also the tongue weight of the 520c?...

2013 F150 supercrew 4x4 with 5L has plenty of power to tow my Ranger 521c and get 13mpg towing...non towing it gets 20 mpg all day...this truck is much improved over my last one 2004 with a 4.6 v8......