Search:

2x4 and hammer.....

And technically it's a shoot-thru, a thru-hull has a hole drilled for the stem and cable.

I got them from Hydrilla Gear.

I bought different lengths for the purpose.

Check the fuse under the TM cover. Is the main switch wired for a TM batt jumper?

Easy enough to experiment with.

Yes, I have. Remove the TM from mount. thru the mount nose, pry barrel from the plastic tabs with a screwdriver. Now you can feed cable to get to barrel locking screws. Take note of cable routing.

It's just 2 pieces of extruded aluminum angle. They don't move at all.

No tray here, not really necessary with LiPo.

https://www.bbcboards.net/attachment.php?attachmentid=531060&d=1693146539

Relay assembly

Nothing on Great Lakes Skipper site?

Damn, must of been bad from their vendor as the magnets are now part of the rotor on Quest.

548447

Some more ETEC techs > https://www.etecownersgroup.com/categories

https://www.bbcboards.net/showthread.php?t=1232663

I utilize the point1, that is used for my engine, on my console mounted Helix 15 g4 thru nmea.

What is the recommended psi? Should be on the trailer reg plate or sticker up front, near the 'V'.

I bought mine thru my dealer. They didn't require it to be installed by them. I made it removable on my rig.

It was complete, matched to driver's console and it was like $1100 otd.

547355

Finally got around to taking a pic of it.

I suggest posting here as well:

https://www.etecownersgroup.com/categories

Do you have a 12VDC light, or some sort of 12V load?
Could be switching with solid state and if using a digital VOM will show voltage as still present but not enough current to drive anything.

Goo-Gone gel to remove the glue. Soak it and let it sit awhile....scrapes right off easily.
...

Also, I replaced the circuit breaker and ditched the plug and hard wired it in.

I just used the existing #8 for my Ultrex,,,,no issues.

Around that time some of the plugs had issues with the pads coming off. New ones have an 'A' suffix now.

Possible option: https://www.bbcboards.net/showthread.php?t=1258050

I've got 1 or 2 hanging around somewhere, I think. Think they're TS's.