My 2010 ZX 250 is rated for 300HP.
Type: Posts; User: newbugman
My 2010 ZX 250 is rated for 300HP.
My SHO 250 was a 2010 with early 2012 power head replace and with around 380 hrs. it broke and yamaha did not replace. The problem is thurst bearing failure. Metal in oil and a lot of play in...
My 10 250 SHO had the thrust bearing problem at 111 hrs. was replaced with an early 12 power head and same thrust bearing failure at 374 hrs. Repowered and hope no problems with this one.
My sho 2010 popped 111 hrs and was replaced 2012 Jan.Popped the late 11 powerhead in 2020 due to crankshaft bearings with 374 + - hrs. Bought 2020 sho for 20,000 and 6 years warranty. Kept old motor...
Get a aluminum and forget about it. My EZ loader rotted out under the bedliner on the axles and replaced it with a Coastline Custom and love it. Boat 2010 ZX250.
My 2020 sho 250 was doing it and i unsrewed it about 3 turns and screwed it back tight and it quit leaking down.
Coastline at Seadrift on my 2010 ZX250
I found a 25 T1 V Max that needs fixing up and need to know is it worth fixing. I was told it is a 2011 prop and not sure about it throwing a blade. What do you fellows think about this prop.
It don't get to cold in south Texas except last week and over the years.I take air and blow through the flush hose and you do get some more water out. I did this before the freeze and run motor...
My 2010 #750 cracked a head on power head after a new power head in 2012 and now with almost 400 hrs have knocking and play up on crank.
I already have a 2020 on my Skeeter and what the hell I'll give it a try. I just hope this one will last 10 yrs. because I'll be too damn old by then to fish.
My motor was a 2010 and lost power head with 111 hrs. New power head was installed 8/12 and a month ago had thrust bearings go bad with 484 total hrs.
How many hrs. on motor.
My 2010 250 SHO with a 2012 power head kaboomed with 384 hrs. on new powerhead. Thrust bearings gave out and a lot of metal in oil. What is the motor worth as is or part out.
What are your rpm's with the scorpion
I just got a Coastline Aluminum and love it for a 2010 ZX 250.
My Sho is a 2010 and after a power head replacement in Jan. 2012 the motor oil used has been Mobil 1. Still running strong with 692 hrs.
I had Coastline out of Seadrift Texas build me one and fits like a glove. It was for a ZX 250 and pulls way better than the EZ loader that the boat was on.
Dual Pro all the way.
South Texas Marine in Alice. Talk to Pat Ball.
I just had someone steal both sides at the lake and got them from EZ Loader. Go to EZ Loader custom and it is clearance light grommet ( 30 degree face ) like $ 4.50. Good luck
Mine does it to and it's a 2010 250.I hit the trim up and down and it will not do it any more.
Running 25 Tempest on my 2010 zx 250sho with Mercury hub kit for the four stroke Yamaha.The only problem is it is on the limiter and 74.5.My hub kit is 835274Q-1 and not a problem.
Thank you for the help.
New from Yamaha.