I paid $100 a month for 12 x 30. Moved to Arlington where no good places to keep it except the drive way. Bought custom fit cover and 20’ tarp to put over co er to keep water out
Type: Posts; User: terry5357
I paid $100 a month for 12 x 30. Moved to Arlington where no good places to keep it except the drive way. Bought custom fit cover and 20’ tarp to put over co er to keep water out
I replaced my 27 with a 31 for the reserve capacity.
I have a 36v Ultrex on my 20’ Pro Gator and it will pull my boat a little better than 3 mph,
I also on have 24 size batteries and I’ve never ran them down enough to notice it.
I hadn't had my boat in the water for 9 months, my son was going to take it out for me (been ill). He tried the trolling motor before heading to the lake and it wouldn't come on. he removed the...
This
We had a lightening strike that took out both outside units. We bought a 8,000 btu stand alone for the Master bedroom to get us thru
while insurance company took their sweet time. It never left the...
Op mentioned “hose clamps”. There shouldn’t be any hose clamps as the hoses have iirc NPT fittings on them that screw into the helm itself. I would think using hose clamps on hyd steering would be a...
Ordering one from ProGator. It’s Sunbrella material. It’s a little expensive ($650) but custom made for my boat
The pin that goes into the brass bushing on my mount is 3/4” the pole is 1.75”
When I was in my early 20’s my aunt gave me a very old very beat fiberglass pirouge. I spent 2 days glassing in all the holes, cracks and soft spots. I put a 30# bow mount MK trolling motor on it and...
I don’t think leaving those bolts loose would be a good idea. Just my thoughts
Grease the balls on the end of trim rams. That is DEFINITELY the problem. Doing that every few trips to the lake will cure the problem
^^^ Great Guy to do business with. He requires 30% down though.
We’ve recently moved and I now have room to keep my boat here at home.
Ive been searching for the best all weather cover and Sunbrella keeps coming up.
Does anyone have any experience with...
112 Ultrex will throw you out of front casting seat
My sweet spot is 50. If fairly rough I’ll run 60 with bow trimmed down just a tad to cut the waves
OG682259
May have an injector driver going bad. Can that be repaired or will ECM need to be replaced. Have heavy fuel smell when idling around and also lost 10mph off top end. Changed plugs but...
Made the mistake of going with small mount. Fortunately my son went with some custom mounts at the helm and gave me a 2.25” Ram Mount. Gotta love them childrens
What type of bolt did you guys use? Like a #20 woodscrew or 5/16 bolt, nut and washer. Not sure I can get to where I need to put but and lock washer on bolt if I went with a 5/16 bolt
Adios Progressive and Bob.
OG682259
Recently had motor rebuilt. As I understand it motor should be at operating temp
when doing a compression check. Where I keep my boat water is not available so I did a cold motor...
I keep a watermelon Red weightless tied on all the time. I fish like a worm and have tremendous success with it. Caught an 8# on it just a couple weeks ago.
I've been down that road thanks to back problems and a "pain management" Dr. After back was fixed I was left with a major opiate addiction. I went to a methadone clinic for a while and then heard of...
I've been down that road thanks to back problems and a "pain management" Dr. After back was fixed I was left with a major opiate addiction. I went to a methadone clinic for a while and then heard of...
Bill I'm truly sorry for your daughter. I can't even begin to think how hard it would be to lose two in a short time, that would completely break my heart.
