Does anyone know if the Livescope system still draws from battery when it's not in use?
Type: Posts; User: tmac19xs
Does anyone know if the Livescope system still draws from battery when it's not in use?
I've experienced the same issue and moved my GT15 tranducer a few times. What I found were best settings were scroll speed max and change frequency to highest setting. Also found out depth has alot...
I went with the 3in1 and it's great. The only issue is side imaging doesnt show depth, only dashes. It's not a big problem, I was just curious as to what would cause this. Thanks for previous...
So a 3 in 1 is worth the extra $$ for idling? I was wondering that myself and also wasnt sure I could have two 2d transducers connected to one unit. Thanks.
I'm getting a Lowrance HDS 9 Carbon for a good price to replace my HDS 9 gen 3. I have a 2d transducer in the hull, can I add a active image 2 in 1 transducer for down and side imaging? I don't...
Mainly 2d depth at speed. Maybe down/side scan. I have Garmin 12s for livescope and maps.
Would an Elite 9 TI2 be a step up from a HDS 9 gen 3? Has anyone used both and have an opinion? I'm looking to upgrade and don't have the funds right now for live. It will be on the console mainly...
Do you know your prop to pad height? Thanks for the info.
I'm currently running a 24p Fury on my 2020 920 Pro XP with 250 Mercury 4 stroke that came with the boat. Just past break in and still figuring out where she likes to run. I feel like I need a...
I don't get to fish grass around my home lakes so I was just wanted to be prepared. Thanks for the feedback.
Just looking for feedback on any possible issues with a trolling motor mounted Livescope transducer and maneuvering through thick grass. Do you have any major issues with grass as it gets caught up...
Final update: after installing a lowrance unit and transducer having no issues reading on plane and determining theres nothing wrong with hull location, I decided to play around with all the Garmin...
Nice shots. 3rd one looks like lighthouse bridge. I'm still learning the settings on mine also, I have the same set up.
With 2 Ultra 126 units, I was able to troubleshoot my problem and found my front quick disconnect mount had filled with water from a rain storm that popped up. I contacted Garmin Support and...
Anyone else having problems with the update? I updated 2 new networked Ultra 126's to fix the power on issue and now I'm getting unsupported transducer error, update not valid with map, traditional...
My biggest disappointment is that my expensive Garmin unit performs 2d depth less than my cheapest Lowrance and Garmin support team basically says that's to be expected. I just spent over $8k on...
Looks like I'll be replacing my Garmin with a Lowrance unit at the console. I spoke with Garmin support and they basically said I couldn't expect any better performance. That just doesn't cut it...
UPDATE: Back on the water after moving transducer off the y cable and onto the +93 unit. The performance is better but still loses bottom around 35mph and depth over 50 ft deep. Its usable now but...
I cleaned up the install and still same results. I'm going to connect the transducer to an Echomap plus 93 and see what kind of results I get. 372999
The transducer is out of the tank and sitting on the pump hoses.
Here's a picture of the install. 372852
Its installed in the same location.
Yes, I know, I just misspoke. Should it be clean with no extra glue? It's just a small amount, maybe not enough to make a difference.
Should the bottom of the tank be free of glue? Mine has a little glue that's over run toward the middle so I'm going to scrape that out and refill with RV antifreeze. Thanks for all the help.
I checked the install and it seems the tank is installed in the best location during build. My question, should the tank be full and is mineral oil better than rv antifreeze? It appeared to only be...