Could be or production can't keep up with demand?
Type: Posts; User: vicsservice
Could be or production can't keep up with demand?
Not at elevation, ohio is about 1000'...I guess we will have to inspect the hull maybe this boat has some extra weight? The guys here with the 622 are running a 21 bravo and easily hitting 65 so...
6100rpm-6200rpm at wot
It is possible it isn't getting max throttle, we have a 2020 621fs pro with a 400 that is having the same exact problem, we ran it to the lake and got a download that shows it is going to w.o.t....
Everything to me in the past month has been on time from them, but its only 1 day ship as they are about 2 hours from my house.
It is a Amish company ( started by supplying solar panels and batteries)but I think all lithium cells are imported from china.
Our guys are running the 3 x 12v 100ah battery, they tell me they can go a few days back to back on 21ft boats. ... I have heard of some running the 80ah with good results but we have yet to ...
Couple basic things , check gear lube for metal shavings? fresh oil and filter on motor? oil level not over full?
Hope this fixes it! if not it might need to have the coil on the 2 fouled spark plugs checked out or replaced.
We have installed quite a few sets, haven't had a single issue yet, local company out of Middlefield.
Progressive insurance does have some warranty/insurance plans available on some motors, I am sure Bob Luellen(board sponsor) could help you see whats available, as a dealer I have yet to see a...
If buying from a Yamaha dealer he can sell you a Yamaha yes warranty even if the original warranty has expired.
It all depends on what the specific issue is that caused the failure, most SHO failures I have seen are upper crankcase failures that require a new block and cylinder heads. I have never...
I would disconnect the starting battery pos/neg for 15 min and see if it "resets" the brainbox.
Bob Luellen is the best, he knows what is best for anglers and goes out of his way to help ALL boaters with sound policy decisions.
Smartcraft gauge trim still working correct?
Thanks for the good info MichAngler I appreciate your time explaining your problems, it helps the rest of us solix users troubleshoot our love hate relationship.
The fact that the motorguide does not fit in the average TM pan tells me the engineers might not have a good grasp on what they are doing? it would eliminate so many boats it doesnt make sense...
Is your motor the new 250proxs 4stroke? if so you will want to see if the serial # has a recall.
I would recommend the merc oil , then do a oil analysis at the next service interval so you can get a baseline. If you want to vary from the merc spec oil you can at least have a baseline...
you need to verify if your compressor is failed then replace the belt/compressor and spark plugs possibly fouled out due to wrong air/fuel mixture? Just a guess
Hitting objects can knock the timing off... so Don is it that g3 can't see the float switch?
You need somebody to monitor it with a computer while trying to run so they can monitor the float switch and vent, it sounds like you have air trapped in the fuel system? what was the cause of the...
Did you get your pickup date?
Have you thought about taking it to Don? I would love to see a saved run file while it was happening. Has anybody looked at coils or spark plugs?
