So I need to keep the motor at 4.5 prop to pad? Wasnt really wanting to go to a fury as I see lots of people talking about slinging blades recently I like the idea of a 4 blade prop. Motor has 18 to...
Type: Posts; User: Hunter_3780
So I need to keep the motor at 4.5 prop to pad? Wasnt really wanting to go to a fury as I see lots of people talking about slinging blades recently I like the idea of a 4 blade prop. Motor has 18 to...
Ok guys I just bought an 06 bass cat sabre with an 06 175 opti on it. It came with a 26 tempest plus on it and was pretty doggy in this hot weather. I found a used 25 trophy 4 blade and gained about...
Actually the bow lights are screwed in and siliconed over. That is probably one of my favorite upgrades.
Will have to check out the reese buckles. Anything else?
I had a set of the bass pro brand and they broke within a month. Been saving for a set of the boat buckle brand.
Hi all I have had this boat right at 4 years and wanted to thank everyone for the detailed posts to Hyde me through everything I have done. I wanted to post pictures of what I have done to my boat...
Are you gonna have to pull the back deck off to put carpet on it? I have am 01 pt185 I'm hoping to do next year. Will be watchi g this very close since it's the same layout.
There is a sticky on this in the how to and mods section. Let us know how it goes I'm getting a tray for mine for Christmas and will be installing it after the new year.
Pm sent about bunk brackets
Thanks 2004 I hadn't thought of cutting the foam. Is that the only way in?
My problem. Is I can't get to the overflow or the the drain hose where they connect into the live well.
Mine is a 2001. It runs under the Gass tank in the bottom of the boat.
I have been working on my live well in my tracker and was wondering if there was anyway to remove it to replace the hoses to the pump?
I only have 8 gauge wiring. Tried to pull new in but can't. 6 gauge wiring will have to wait till I recarpet next winter. It has 2 30 amp breakers which I know will have to be switched out with 50...
I currently have a minnkota power guide 50 ft# 12 volt motor I'm looking at getting an x3 digital 70 ft# 24 volt motor. I was looking at my current wiring and I have 4 wires run from battery to bow(2...
Where do you find the rebate?
Anyone?
I'm looking at getting a new trolling motor for my boat and have narrowed it down to the motor guide x3 digital and the x5. Can anyone explain the difference In these two? If the only difference is...
One thing I have noticed is I have 4 wires run instead of 2 does this make a difference on the size wire that needs to be run?
Yes I pulled the bow panel off and removed front 2 screws as well still can't get the front deck to move. I removed the drivers seat when I added my blue water pro boat kit and it is carpeted under...
Thank you caskey do you know if you could have pulled the wire without taking the front deck off? I had thought I might be able to attach new wire to the old and pull it through. How hard was it to...
Ok thanks. Gonna go look now to try to figure out how to get rid of the original cb.
So I leave the existing breakers and add a 50amp at the batteries?
I would like to keep the breaker system close to the way it is so that it fits in the stock housing. Would I need 2 50 amp breakers?
Ok guys I need a little help here. I have a 2001 tracker pt185 that I bought 3 years ago. It has been a good boat but it came with an older minnkota power drive 50#trolling motor. I haven't liked...