Thanks for the replies!
Type: Posts; User: JWW9589
Thanks for the replies!
Has anyone mounted dual graphs on the bow of an XB-21? Trying to find a good way to mount a Garmin FFS unit and a HB Helix (10 inch) together on the bow.
If you don’t mind me asking, what did it cost to replace the carpet with Aquatraction?
My CMC Jackplate quit working after 8 years. When I hit the blinker switch I can hear it click at the jackplate but nothing happens. Is this most likely a bad actuator?
I added the steps and handle to my Boatmate trailer after market. They are definitely a nice addition. I had some play in the chrome handle where it fits over the steel pin in the step base with...
Thanks!
Can someone tell me the best way to get the livewell divider out without tearing stuff up? Thanks!
What types of shops are y’all using?
Has anyone found a good way to improve the seats in the XB-21? After 7 years, the foam seems to be wearing thin in mine.
I appreciate the replies. I am leaning toward replacing the case, however most of the skeg is still intact. My thought is if it was welded and broke off, most of the skeg would still be there. ...
I hope so. Prop is trashed too.
Sorry here is the 2d pic.
Another pic that shows more of the LU
Here is the picture of the skeg. It has two chunks knocked out of it.
I broke 2 big chunks off of my skeg on my TM2. Am I just asking for trouble if I get it welded or should I just replace
the case?
OK. Thanks!
There are 3 or 4 different HB groups on Facebook. No idea which one you are referring to but I will make my question more specific. I understand that if I use my Helix 7 si G3N and transducer to...
Thanks for the help guy ...
If I network a Helix 7 G3N SI mega unit with a GEN 1 Helix 10 SI through the 5 port HB switch, will the Helix 10 be able to read the imaging data from the Helix 7 G3N? I would be using the...
Thanks River Rocket! Great vid!
I am assuming you are seeing slight gains on top end with increased set back but is hole shot suffering much? My boat came with 2” spacers and negative wedges and hole shot seemed to be much better...
For those of you running this setup, are you getting better performance with 4" spacers or with 2" spacers and 6' CMC Hydraulic JP?
This is a good thread. Let me ask a question just to clarify the livewell operation. If the switch on top of the livewell is in the “recirc ” position and the aerator switch is in “auto” will you...
I took out the factory installed rod holders in both the rod lockers. I store my rods in the port side locker (25-30 rods) and added a long Tupperware containers in the starboard and center front...
Is 1/4 X 20 the correct size bolt for securing the handle? I have sheared 2 of the single SS bolts and almost lost the handle the second time. I want to try double bolting it. Thanks!