If you are going to put a tempest prop on an evinrude you must purchase a hub kit that is made for that purpose. you can not use any thing from your previous boat except the prop. The hub and washer...
Type: Posts; User: koops
If you are going to put a tempest prop on an evinrude you must purchase a hub kit that is made for that purpose. you can not use any thing from your previous boat except the prop. The hub and washer...
It has to be a merc hub kit to put a merc prop on an evinrude. a Regular merc washer will not work. The evinrude hub kit will not work. I fish almost every day this time of year. Might be a few days...
I use the same thrust washer that I used on my L2. They come with the merc hub kit for evinrudes. They are thin compared to brp washer. Some have had problems maintaining proper prop nut torque. Read...
I do 60 in the front and 70 in the back. That works for just about anything I want to do.
Do it. I did and have no regrets.
I sent you A pm. I have a near new 80 pound fortrex I'll sell.
Brett is excellent as is Eric at anglers , but I thought anglers dropped Merc a year or 2 ago.I know the last time I was there, they had nothing but Evinrudes on display.
Absolutely true. An interesting fact is that there is no federal requirement that E-10 be sold. The requirement is a percentage of ethanol per total gallons sold in the state. If there was enough...
That dribble just kinda proves my point. Most people come here to talk about fishing and boats, not stupid sh*t like your last sentence.
I don't know how old you guys are , but the main support for the ethanol requirement came from the farm lobby and I think most people know which party carries their water (hint, it starts with R )....
I also have a 2008 250 HO. It has ran like a raped Ape since day one and have had nothing break , rattle , or come loose. I do have a water separating racor mounted in the bilge and change it and the...
:thumb up2: Thank you
Gunnar;
Do you have approximate dimensions for the box and does he make it in different sizes.
You should not be doing 6000-6100. 5750-5850 is the sweet spot. Try a 26 fury or better yet a 27 Tempest. I run a 250 Rude HO on a 210 champ and it will do 75 at 5830.
Appreciate the offer. We're sending a new off the shelf 26 tempest to Mark to work on. It should make my brother happy after he makes the changes I asked for ,if he isn't , I'll take you up on your...
Don
Problem solved. I put a known good 25 tempest on it and gained some rpm, not what it should , but some. I sucked the tank as low as I could and filled with fresh 87 octane and made another...
Don
I'm going to hold off on calling for a bit. I think I know where your going. I found that it was filled with 90 octane ethanol free. A slight power loss but I don't think it to be the problem....
Don,
I am using smartcraft digital display. Boat is 2011 210 Champion purchased by my brother new in spring of 2012. Dealer propped it with a fury 25. Comes out good with top end of 70 and rpm...
I'm helping set up a 2011 250 proxs with 15 hours showing. I've been told that rpm is restricted to 5800 until 10 hours. Is this any hours or just hours over 2000 rpm. The reason I ask is I can not...
Yes sir, it includes a prop. I owe you beers also for mentioning the "get well program".
Seahorse
I gave them a call as you advised and they were very willing to replace my L2. Completely different attitude from last year.
Sometimes in my travels between Illinois and Florida...
Is this a new program ? I called BRP cs a year ago and they would not replace the L2 on my 2008 250 h0. They said only for certain boats that were known to have cooling problems or for units that...
Would love to know the reason given for not doing the repair.
I had a long chat with BRP customer service and when it ended I didn't have any warm fuzzy feelings for BRP. They admit that the same valve is used in all 3.3 and 3.4 engines and that the valve is...
I think you miss the point jughead. Seahorse says the bulletin does apply to my motor model # E250DHLSCS , which is 20'' with lighting gearcase, and that is what was put on bass boats in 2008. But it...