This is a problem that I've not seen a legit fix for yet. Maybe try a factory reset? Mine still does it.... Yes, assuming your transducer is actually pointed the right way, many people still have...
Type: Posts; User: TommyBass
This is a problem that I've not seen a legit fix for yet. Maybe try a factory reset? Mine still does it.... Yes, assuming your transducer is actually pointed the right way, many people still have...
This is my issue with it. The directional 'cone' icon has to be perfect. My point one works great as my heading sensor on my chart, but I find the AT cone to be very inaccurate. As of now I...
It's one of the most annoying features on Lowrance in my opinion. Unless you have quick set keys, stopping sonar takes wayyyy too much effort. I go through and stop all my sonar when using AT, and...
PM sent
I have a HDS Live 9 because I couldn't afford to go any bigger at the time. It works just fine if your eyes are decent. A lot of that depends on where you have it, if you are splitting screens,...
From what Lowrance told me, you have to install it for spot lock to work correctly? You can't force the point-1 as your heading sensor. Unless you bought a ghost and don't want spot lock which makes...
I've not heard a good reason for this, it makes no sense why Lowrance would design the Ghost to not have the capability to use a heading sensor that they already produce and that already talks to...
It is under 'Contact Us' when you go through all of the options. One option is to speak to tech support, and this page comes up.
482321
I know they've had a bad reputation in the past, but since people mostly get on to complain I figured I'd give them a praise. Bought a ghost and one of the pins/screws that holds the gas cylinder...
So just an update on this, I did install all of the latest software versions this week. The unit still reacts the same and is extremely unusable with Stable View off. Just like I'm sitting on the...
So when I have my AT with Stable View selected, the bottom contour appears normal and flat when you'd expect it to be flat (no depth changes near by). However, when I try to switch it off, it...
I'm pretty sure that stopping the 'side image screen' will stop your down and side scan pings, but not the sonar ping. If I recall doing this the last time, my sonar page was still going after I had...
Forward and down work great. I can see fish to 60' and structure/cover to 80' if big enough. Obviously water depth and clarity matter, but I used it to catch a bass on a dock 40' away in 2' of...
You could run this on a 7 and be fine. Yes, bigger is always better for seeing detail but you can make it work effectively. I have a 9 up front, and often split the screen with the chart/AT, and...
Here is my AT review after a few days on the water (Terrova using precision sonar mount):
-Forward view is amazing, can spot fish and stumps out to 60' in water that is 1-2' visibility. Down view...
They'll close Turtle Creek anytime that winds are forecasted to be sustained about 20 mph. They'll also close the lake if they get any gusts that have a 2 minute average of 20 mph + (they have a...
I've lost several, but my aluminum boat is painted camo and has a rough surface. Best bet is to use Goo-Gone or similar anti-adhesive product, wipe / scrape clean, use alcohol to remove residual...
There are still 5lb fish in there that won't keep, especially prespawn. Had several 19's that were probably 5.5. After spawn you can obviously catch some long 20" + fish that are < 5lb. There is no...
It'll open late February, after waterfowl seasons are out. Still a lot of fish in it, but fishes quite a bit tougher with all the pressure it gets anymore. The warm water end is limited with good...
It used to be pretty good, not sure if they still stock the same etc. I used to go quite a bit 15 years ago, caught several over 20lb, biggest near 25. Lots in the 10-15 range. You can troll large...
Finally figured it out. No fuses were blown. Tilt / trim did not work at either location so I knew the motor had no power. Ended up pulling the main ground by the starter, sanding it down and...
UPDATE:
Replaced battery (it was a 2015 anyway). Still same problem. Red cable on starter shows 12 v when you test to ground. Still doesnt try to turn over and trim still dead. Ground maybe,...
I did not test the battery... yet. Makes the most sense, other than every other 12v accessory runs fine on it, and I don't even hear the solenoid clicking or engine even remotely try to start. That...
I have a Yamaha F90 (2009) that seems to have lost power to the motor. No starter noise or tilt trim (can't even hear solenoids clicking). Battery cables appear good and battery shows 12.8v. ...
https://www.youtube.com/watch?v=7TVuJbeqpTk