You can’t get the 6.2 in the Trail Boss. It only comes in the LTZ and High Country.
Type: Posts; User: Chase3009
You can’t get the 6.2 in the Trail Boss. It only comes in the LTZ and High Country.
About 70% city, 30% highway at this point. I'm getting 16.2 hand calculated. Thats not being real easy on it either. I'm totally impressed by the mileage. I made a 250 round trip on the interstate...
I just bought one. An LTZ with the 6.2. I've only got a bit over 1000 miles on it so far. I love it so far. I hooked the boat up to it for the first time today and it pulls it great.
I'm coming...
Hi all,
I have a 2006 HPDI 200. Just a little history first. The motor was rebuilt by Hydro Tec in June of 2016. It has a phase 2 kit with a raised limiter. The boat is a 2007 Skeeter ZX200.
A...
Yep, only 1 bilge. Mine is the same. Port and starboard buttons but only the port comes on. The pump is installed directly below the battery charger.
I grabbed a 52" 80lb from bass pro. Being delivered tomorrow.
I know its not a 20i, but I run a bravo on my ZX200. To me its the best overall prop i've run. I'm really wanting to try out a Fury 4 at some point. We did run the Bravo on my Uncle's 20i and there...
Thanks, I'll check it out tomorrow.
I pulled the airbox off the motor to check that my hot foot was set correctly. When I went to put it back on I have a hose that i'm not sure where its supposed to go. It is the bottom hose that comes...
I have an 07 with a jackplate on it. Most of these have trouble hitting 70. Most seem to run in the 67-69 mph range. The holeshot is great. But, all that depends on what prop you have. The 25 T1 will...
I've seen a lot of that old orange tile stuff break. Especially up in the northeast. With the wi yet y'all had last year it probably took a toll on it too. In Texas you don't see a lot of percentage...
Coming from an adjuster. It depends on what the cause of the pipe leak is. If it is just a wear and tear deal then you will have no coverage unless you have a specific endorsement relating to sewage...
That looks great!
What prop is on the boat? Is it vented or non vented? A sho should have a non vented prop to help it not slip during the hole shot.
Ive been wondering about this one myself. How do the finesse bait caster setups compare to the spinning setups? I struggle with throwing shaky heads and drop shots on a spinning setup right now but I...
Nice!
Thats a crazy slow holeshot. Where did you find those numbers?
http://www.bbcboards.net/yamaha-motors/283304-trim-gauge-not-working.html
Check that link. It should have the information you need to get it fixed.
Why would you plug it?
Didn't know that either. Thats good info.
I'm fairly certain this is not true. If you look around the board some you will find that the prevailing opinion is that AGM's are superior for the cranking battery and tons of people run them.
+1 Sams Club has good pricing on the Duracell AGM's. You can get a 31 for around $200. They also have the optima blue tops which is what i went with. I run a 27 with an HDS5 and a 998csi and its been...
This is my thoughts as well. He posted a picture of the prop in another thread but I can't make out the numbering on it. I can see that it is 14 1/2" but not sure on the pitch. If he could start with...
Mine has the 3.3 HPDI. What pitch is the prop your spinning?
I would lower it 1/2" and try that. But, the prop is probably going to be the biggest thing. I have the same boat with a 25T1 and as long as you know how to trim it porpoising isn't an issue at all.