2003 Ranger boat trailer that jacking the trailer up or down is really stiff. Watched videos on boat jacks it looks like the long threaded rod inside the jack gets rusty. Anyone take this apart and...
Type: Posts; User: bigtbassman
2003 Ranger boat trailer that jacking the trailer up or down is really stiff. Watched videos on boat jacks it looks like the long threaded rod inside the jack gets rusty. Anyone take this apart and...
My 20 ft Ranger, 1999, has developed a spongy hatch lid. Is there an easy fix? The problem lid is the lid where our grandson stands on to fish from. I'm afraid it is going to cave in. Anyone...
Years ago I purchased a Ranger boat cover for my 1999 620vs. It was a genuine Ranger cover, second with minor flaws. sold by a guy near the factory in Arkansas. He would get them from Ranger or...
I've used The Works but still end up with a dull finish. Tried a small area with rubbing compound but still a dull look. I'm afraid to try wet sandpaper thinking I might go through the gel coat. ...
1999 Ranger Fisherman. Kids have been using the boat the last several seasons and obviously never wipe it down after leaving the water. There are times when they are able to leave the boat in the...
Metal and yes
Bill, here is the info. Don't know how quality they are. https://www.amazon.com/gp/product/B07DW7V6XR/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Thanks Bill, just installed the shocks this morning. I found a site that had the shocks with the screws together for $11 on Amazon. One guy said he completed the installation in 45 mins. It took...
Don and guys, I replaced my fuel lines a few years ago bought from Don. Easy job. They seem to be aging well. My 1999 Ranger 20vs came with a additional fuel filter, screw on type in rear bay. ...
wlureshop. Anyone try these jerk baits on Ebay. They have a ton of different crank baits. Always looking for something close to the Lucky Craft Staycee 90 for small mouth bass here in Idaho. They...
I had it on a Harley Davidson doing 75. The steering went from lock to lock. Not fun. Able to keep it on the rubber. T
Thanks for your research Don. I've read the annouancements several times and it is confusing as to what is required. That is why I listed my engine and boat etc. I guess the only thing I didn't...
Sons use the boat most of the time, 225 optimax 2003 on a Ranger 620vs. Couldn't figure out what oil they have been putting in. Finally found the empty jug and matched the oil color. It turns...
Oil identified. Found the empty container in my shop. The oil is Magna 1 dfi . I'm trying to find out any information on the oil. Their web site says it is recommended for all dfi outboard...
My 2003 Optimax 225hp has a light green color 2 stroke oil in the tank. Sons use the boat all the time and neither one remembers what they last put in. I've always told them to use DFI oil but you...
Thanks for all the posts. Although the miss is not as bad as it was I don't think it is idling as it should. I'm now leaning toward getting rid of the metal reeds and going with one of those...
Ran seafoam through the VST and the slight miss cleared up. Can't wait until spring to open it up. Thanks for the help. T
Thats why I hate to post. There is always some smart ass remarks. A bad plug will not be intermintent. Forget it, I'll post on another site and hopefully I'll get some ernest answers. T
YEP
In order to get stabil into system for winter I ran 2003 225hp 280 hrs ,optimax on muffs for 30 mins. Seemed to idle fine. Changed plugs, did compression test. Now it seems that I have a slight...
1999 620. Grandkids lost the rear step pad, came unglued and flew off. I'm trying to find something similar and replace the other side also. Any thoughts. Thanks T
Do the reed kits come with everything needed, gaskets etc. 'Thanks T
Trying to rundown a slight stumble on idle. Not constant like a spark plug miss. 2003 225HP optimax 280 hrs. Always run Opti oil, every now and then some quickleen. Been on the net for hours...
Buddy just bought a 225 optimax that has 300 hours. The original owner ran nothing but Pennzoil xlf and loved it. I've been reading for hours on pros and cons of Marine 2 stroke oil for dfi and...
Mercury 225 outboard that has small dings and chips on front of skeg. I am looking for something like the keel shield material that will glue onto the front. I am thinking something like the car...
