2011 stealth1:ac/dC charger. Works great since I bought boat 5 years ago (all Agms)
Now running AGM cranking and 3 new lithium’s on 36v trolling with emergency start wired in
does anyone know...
Type: Posts; User: MDBASSNPRO
2011 stealth1:ac/dC charger. Works great since I bought boat 5 years ago (all Agms)
Now running AGM cranking and 3 new lithium’s on 36v trolling with emergency start wired in
does anyone know...
Leonard
After reading your latest post on LVS62 loss of clarity with stronger gain, is it possible Garmin LVS32/34 algo is actually making the further ones larger given the gain ?
Thanks Wayne. Final question- is it possible to have the AS GPS HS also connect to a Lowrance Gen 3?
Thanks all. Do I need a Y splitter cable to connect the puck or does it plug directly into the Helix?
I have Helix Gen 4 Mega and Mega 360 for Ultrex at bow. Also using a Fortrex trolling motor. No other xdcrs connected
Currently have AS GR50 GPS puck from 958CI at bow.
Is this puck compatible...
Agree with Todd. Also always good to reset all the defaults and reboot.
Works better than side or downscan; however where all the images degrade is when there is sediment in the water due to current picking up the particulates. Still better than side or downscan.
ttt
Thanks Fishin.
I am partial to that teal for sidescan but don’t know if that would be my preference for forward vue on lvs32.
Which brings up a good point, I haven’t done the latest update for...
Enjoy my echomap touch with Lvs32 on bow.
Does anyone recommend upgrading to UHD 9” for LVs32 only unit?
thanks
CoAngler looking for boater during official practice.
Thanks,
Zip ties work on my older puma.
Going from memory but I believe the larger connector at bow has a dongle that allows smaller cable to be routed to bow and larger end connected with jack.
Just switched from bird to hds new to me carbon and have the same Beede tach, Speedo gauges via Smartcraft.
Found this thread interesting and wanted to know if this orange com wire can get the...
Thanks TC. Nema only for Gen 1 or Gen 2 to share waypoints? And do the pre Gen 3 need a puck for gps?
Currently have Gen 3 with Navionics Platinum + at console. I want to get a cost effective Lowrance unit at bow that uses their waypoint and symbols as well as use Platinum + mapping.
I want to...
Using IPAd Air (2) and the Gen 3 unit gets disconnected often and eventually won’t connect.
Any secret to keeping it connected ? Wondered if 20’ was too far for the wifi …
Help needed to get reliable screen mirroring to my iPad from Gen 3 unit at bow.
I gave up using the Go Free app because to unstable then switched to the mirror link app and it’s not any better.
...
Further troubleshooting it must be something with wiring to motor inside top of pump motor. The slightest tap on top right of motor and it works great but not real practical on the water.
...
Apologize for old thread ..
did maintenance in Detwiler plate, greased zerks, added fluids, removed air….plate only works when I give slight tap on top of pump motor….thinking it is gummed up...
Thanks Todd. 6/2018 latest update.
I would be very suspect of any 3D version being an upgrade.
The ability to overlay multiple !ivescope units is what I believe is a sneak peak into next version.
Additionally, the ability to select...
Does the update help the non touch 93sv or 93sv touch (non UHD) not running 2 Livescope?
Thanks all!
Thanks BCB….
Thanks macti
Willl be ordering from BCB but it’s got to be the ckt board from the pin to the lights for turn/ stop light. All the same lights work perfect when tail is powered.