Ok guys so here is the latest. I put the lower unit back together and ran the motor on the muffs in the yard. The motor shifted smooth forward and reverse no issues, I was like heck yeah. The next...
Type: Posts; User: kkelley
Ok guys so here is the latest. I put the lower unit back together and ran the motor on the muffs in the yard. The motor shifted smooth forward and reverse no issues, I was like heck yeah. The next...
Hey I am with 316jughead can you share the website info. It would be greatly appreciated.
Yep i found them. They were behind the gear. I guess blessing in disguise to get to them i found my main shaft bearing needs to be replaced. So my question is this, is it worth rebuilding or...
If they aren't there could they have gotten into the nose cone of the foot by some mysterious act. The reason I ask when I pulled the prop shaft out the cam follower did not come out with the shaft....
I need to ask a question on the parts list for a cam follower kit there seems to be three ball bearings. when i removed the dog clutch assembly i do not see these. So am i missing something or were...
Thank You will do. So I might just have a cable that went bad since there was no metal in the gear casing ?
https://www.youtube.com/watch?v=PU2k6YwWBQk
I am turning the prop by hand while in forward gear as you can see the prop slips is this right. Now while in reverse the prop will not slip. Like i...
https://www.youtube.com/watch?v=Y8Sc-PfkI5w
I have drained the gear casing at this time and found no metal in the oil. It was clear i mean non milky. In the video i am turning the flywheel...
The gear case looks original to me and it does look small. Is there a way to check to see if it is the original?
when you say it wont fire. Have you checked the plugs to see if they are firing. From what you are describing it sounds like no fuel is making it to the carbs. Mine kind of did the same thing it...
I don't think it is a bearing. I have a 91 xr4 150 and when i dropped my lower unit to replace the water pump i had the same issue. My unit would not go on i put a bright light up in the mid...
Well tonight i unhooked the shift cable and manually shifted the engine into gear both ways. I manually rotated the engine and shifted the engine into gear and the prop turned like it is supposed...
Craigslist ?
I believe the linkage is fine. In neutral the prop spins freely. Shift it in reverse and the prop locks can not move by hand. Shift it in forward the prop will spin and click on each rotation but...
91 XR150 ser# oc267202. So i lost forward but reverse works great. HAHAHA. The good thing is that it happened at the end of our fishing trip right before we got back to the boat ramp. We stopped...
Nice rig. Great find Enjoy. Welcome to the club.
Thanks for all the replies I might have to try and make one.
Do any of you fine Cajun owners know where a fellow might acquire a windshield for a 178 Pro Sport ? :salute:
Looks really good :thumb up2:
I have a 178 Pro Sport my fuel tank is under the seats. The fuel line starts there the runs to the connector coming out near splash well. The other side of the well has the vent for the fuel tank. ...
The stator does have a low side and high side. It sounds like you are having issues on the low side of the stator. The serial number would be a big help on this. How was the spark on cylinders ?
Have you cleaned the carbs ?
my issue like this was a fuel problem. cleaned the carbs. Are all cylinders firing?
it might be your stator. The stator has a low side and high side, the low side goes to 2000 rpm then the high side picks up. In the manual you can ohm test the wires to see if good. How does the...
I own a 91 Cajun Pro Sport with a Mercury xr4 150 and use mine for fishing. I have never pulled a skier or tube but i imagine it would with no problem. If i am not mistaken they were built in...