Search:

You are welcome Cal. On my 2019 Classic, I used that accessory to provide power when I installed my own lighting for the compartments. I tapped power from that accessory and ran it to an on/off...

This is what most people report. And the MG lined up with the Ultrex, so MG to Quest should work if you take off the side plate and expose more mounting holes.

No. Lead acid batteries should be charged as soon as possible after a trip. If you want your batteries to have maximum longevity, it is best to minimize the time that they sit in a less than fully...

In that 2013 Cougar (like I had) you are correct in that the graphs are tied into the boat’s main harness. This was a couple of years before BCB started offering a separate circuit and harness just...

You could also take a voltmeter with you when out fishing, as mentioned above in post 4, and check their voltage periodically during the day. Load testing is more useful when testing a crank battery...

I have had two on my different MK trollers for many years. They work well.

The problem could be your charger if your Ranger has a Dual Pro charger from the factory. There are known issues with the DP chargers and their inability to fully charge a Northstar/X2. This has...

Small little ultrasonic cleaner. I actually picked it used from Marketplace for ten dollars a few years ago. You can get them new on Amazon for 40 dollars or so, for cleaning jewelry.

That looks great. The upholsterer did a nice job.

I only build on the RX 10 blanks for myself now. I am a big fan. I build Revs, RX 10’s and Immortals for customers. Although I still like the Immortal blanks, I dislike that painted finish and would...

That’s a beauty!!!

Agree also. But bigger is usually better. More storage, space, and better in the rough stuff. Extras can be added later, but boat length can’t. Throttling back on the bigger boat with a 150 will...

Agree. These charging issues with the X2 are well documented here on BBC. That is why the Odyssey 31 AGM is a better choice. However, at the price, you are approaching the cost of a good lithium...

Now that your boat is stripped, use a sealant. I use Pro Tec once a season after my boat is stripped. Fibreglass is porous and a sealant will seal it properly. After that, use any other wax, quick...

I’m wondering if, when you plug it in when you get home, that it is not coming to full charge using the power pole charger. That was an issue with that X2/Northstar and the Dual Pro chargers....

Glad you figured it out. And I wouldn’t worry about the colonoscopy. It’s the night before with the prep that is not fun :laugh::laugh:

Totally agree :thumb up2::thumb up2:

Enersys, the parent company of Odyssey, bought Northstar a couple of years ago. Hard to tell if the X2/Northstar is now identical to the Odyssey 31 AGM. Weights are different, casing is a bit...

This. Probably the best one around.

What a remarkable young man. Great pic

Very excellent product. The Chemical Guys products are a little more money than most others, but, IMO, worth it.

Exactly. However, knowing that fibreglass is porous, I believe that sealing first is the most important process. After that use your favourite product. At the beginning of the season, I strip and...

Agree with this. After a good cleaning in an ultrasound, Shimano bearings spin forever. Better than any other brand I have cleaned, including my Daiwas.

Trick step, Troll Tamer lock down. My Talon is so old that RMP does not make a light for it, so, I bought a small adjustable stern light on Amazon, screwed it to the top of the Talon, and ran the...

Up until recently, I have only built rods using Rainshadow blanks. RX10 (high end) and Revelation (lower range). The past two months I have built 4 rods on the Bushido blanks. I would compare them to...