I was thinking the same thing. And what kinda car has a mirror that low
Type: Posts; User: SkeeterSD
I was thinking the same thing. And what kinda car has a mirror that low
I use belle haven when I want to fish DC area on the river but always check the tide first. If it’s low tide around the time im planing on pulling out I will goto Gravely Point by the airport.
Throw 24p tempest on it and see how it does.
Had the same thing happen to me a few years ago. Ethanol fuel built up and clogged filters. Replaced all filters and it was good as new
The SX hull isn’t known to be a fast one. You could try adding a jackplate. I picked up 2-3 mph when I added a jackplate to my SX186 that had a 150hp on it.
I just recently traded a Elite 7ti for a Elite 9ti and the temperature doesn’t read on the elite 9 ti. Worked fine on the elite 7Ti. It’s a total scan transducer. Any help would be appreciated. Thanks
I have upper and lower HydroTec solid mounts. I have no issues with them so far. Slightly more vibration but hardly noticeable. I noticed a big improvement on steering response and handling at high...
Search a seller on eBay called SkeeterTom. I ordered a set from him years ago when I needed a few for my SX. They were even the same key
Similar setup but with 200hpdi. With a worked 24p tempest it would run 69mph with just me and a light load. Full tank and loaded would do 64-66 with 2 people loaded to the max with tackle. The...
Fishing was really good on the hotside last week. Was expecting it to be tough since they aren’t moving hardly any water thru the plant
Hotside was packed all week.
Fished the hotside from Thursday morning til Sunday afternoon this past week. Was pretty good fishing. Had 30 keepers a day and a handful of low 3 pound range spawned out females in that time. Didn’t...
Few years back I was able to source them off eBay. I had the same issue. All mine were worn down
Hot side of Anna is a horrible place to fish. A few dink’s. Not worth the trip. :P
As mentioned above, your elevation has a lot to do with it. I have a TZX200 with a 200hpdi.(same hull as a ZX200) I’ve seen 69.8mph out of mine but average 66-67mph. I ran out of lake that time I...
I read in a article a few months back they have put a few thousand of them in Anna in the past 2 years and tracking them to see the growth rate. Either way. It’s a good thing. They have done great on...
I have navionics platinum chip and it is definitely lacking some detail on the chick. It has no contours at all above the dam either.
TZX200 is a solid rig. Only complaint I have with mine is the latch design for the compartment lids. Will run 70+Mph with a light load.
Sounds like possibly a bad livewell timer. It should have 1 pump for each livewell.
The SX hull is know for not wanting to turn when the jackplate is higher due to the design of the hull. I can’t speak for the SX 200 model but I know the SX186 I used to have Skeeter didn’t offer or...
Does it have a manual and auto setting for the livewell
It’s fishing a little differently after the 70+ inches of rain we got last year. Good bit of shoreline wood that was there for years is gone from the flooding. Just have to adapt to it.
Well that’s a big let down.
Anyone interested in a 8ft silver talon with travel cover, jackplate bracket, 2 remotes and RMP nav light I have mine for sale for $1100. Everything you need to bolt on and go. Would like to do a...
Sent you a message