Search:

I’m running a 25p tempest plus and only getting 5200 rpm’s out of it...
anyone running a 24p tempest plus on their Opti? Was curious to see what kind of rpm’s people are getting out of a 24p. Thanks

Does anyone run a 24p tempest plus on their 225 Opti?
Currently I’m running a 25p tempest plus and I’m only getting 5200 rpm’s out of it. Was thinking of changing to a 24p, thoughts?

Changed a coil and plugs and she is running fine now, knock on wood!!

The mechanic that I have been talking about is a certified tech with 30 years experience....

I know that I wrote about a lot of different things and tests we did. I just don’t know the correct verbiage to be less confusing to you. I apologize for that.. I do appreciate you taking the time to...

He wants to try replacing the switch and slide.. he notice some play in it and sometimes when I put the boat into gear it would stall. Thinks the switch maybe sending a message to the ecm and...

On his computer it said block pressure... when I looked it up I saw posts that said block pressure or water pressure.. so I think so...

Good question, I will ask him that. We couldn’t get the motor to run well enough to perform any tests while it was running... just talked to him we did run a drop test and everything was fine.

Sorry if I’m being confusing, trying my best.. I appreciate you guys trying to help me...

What I’m trying to say is that if I unplug coils 2 and 4, than I test coil six it will spark once and beep like I turned the key off and on. If I have coils 2 , 4 and 6 plugged in and test coil six....

Yes, all three have a ground that are connected together and grounded on the plate. The grounds tested fine, but we changed the connector anyway just to make sure. There is no physical damage when...

Another weird thing is that the block pressure read 15.42 when motor was not running. Wasn’t sure if this was a default reading or something to be concerned about. Have no idea what would cause...

Checked all the grounds and power.. all checked out.... even put a new ecm on it. My mechanic says he hasn’t ever seen anything like it in 30 years.... probably going to be something stupid when we...

All grounds were checked and we put a new grounds on coils 2,4 and 6. Still didn’t change the results. Is there one ground for the coil plate? If so, if the ground was bad wouldn’t that affect the...

6 coils spark tester, testing 1 coil at a time with the motor off. Running the test through his computer software... used a volt meter to check all the voltage (all good) etc... spent 8 hours...

Was running my boat, everything seemed fine. Let off it to avoid some debris, when I got back on it the motor started to break up or misfire and turned off.. it start up up no problem but once I hit...

But we bypassed the plugs to run the test on the computer...

Sorry.. sn OG802957. Yes they are the correct spark plugs, that are kinda old.... they are being replaced as well, guess the mechanic wanted to figure out the coil problem first.. he said he has...

Ok I will try to explain to the best of my ability on here...
So coils 2, 4 and 6 located on my left bank are tested they fire once and than lose power , I than hear a beep just like when you turn...

Ok I will try to explain to the best of my ability on here...
So coils 2, 4 and 6 located on my left bank are tested they fire once and than lose power , I than hear a beep just like when you turn...

Thank you

Ok I will try to explain to the best of my ability on here...
So coils 2, 4 and 6 located on my left bank are tested they fire once and than lose power , I than hear a beep just like when you...

I'm looking for a 20 foot trailer if anyone has one or knows of one for sale.. Thanks

the kicker is, I got the charger less than a week ago! I have the best luck! Lol

I did that all, I was hoping that I was missing something .... Thanks