Search:

Type: Posts; User: Wackyjig

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. I catch a bunch on a swimjig off wood. Usually if...

    I catch a bunch on a swimjig off wood. Usually if I'm fishing laydowns I've run a swimjig around the outside edges before I get there to flip it.
    I just keep a steady retrieve and let it bump over...
  2. Thread: Bilge pump

    by Wackyjig
    Replies
    4
    Views
    88

    My 721 does the same thing. I've had everything...

    My 721 does the same thing. I've had everything apart all the way to standing on my head in the bilge area. Voltage makes it to the pump with the manual switch but it doesn't run. Auto works though.
  3. Replies
    7
    Views
    128

    The Phoenix wp gauges aren't that great. Mine on...

    The Phoenix wp gauges aren't that great. Mine on my sho would peg out maxed over 3500 rpm. I went with the Yamaha sending unit and I'd recommend doing the same for your merc
  4. Thread: Magdrafts

    by Wackyjig
    Replies
    31
    Views
    1,176

    Head shake is all I can figure too. I fish...

    Head shake is all I can figure too. I fish swimbaits alot and thrown a bunch of different ones and I've never had them hit any of them as hard as the magdrafts.

    Side note, how do you like those...
  5. Thread: Magdrafts

    by Wackyjig
    Replies
    31
    Views
    1,176

    I guess I'm out of luck. I'm down to just one and...

    I guess I'm out of luck. I'm down to just one and it's in rough shape. I've been looking for a stand in replacement but I haven't found anything I like especially in those colors
  6. Thread: Magdrafts

    by Wackyjig
    Replies
    31
    Views
    1,176

    Magdrafts

    Anyone know where a fella can find some 6" magdrafts in white back shad and albino pearl? Everywhere I've looked is sold out and won't have any in stock for months.
  7. Replies
    2
    Views
    88

    Ultrex broke cable remote question

    Had a steering cable break on my ultrex the other day and when I went to try to use the remote to keep on fishing I couldn't get it to turn right. It would turn left no problem though. Anyone ever...
  8. Replies
    9
    Views
    395

    The majority of the power head failures you've...

    The majority of the power head failures you've read about are from the faulty bearings in the early built ones that choochoosnakeman mentioned.

    But your motor falls under the "shit happens"...
  9. Replies
    10
    Views
    669

    Humminbird will probably come out with a live at...

    Humminbird will probably come out with a live at some point but I doubt it will be this year. I honestly would rather see some small tweaks to the 360 than have them come out with a livescope.

    Let...
  10. Thread: Kistler rods

    by Wackyjig
    Replies
    21
    Views
    819

    I'm up to 5 of them. 2 helium casting, a helium...

    I'm up to 5 of them. 2 helium casting, a helium spinning, and 2 feel n reels. Love them all and will probably add more eventually.
  11. On my boat the bravo actually rides a tad bit...

    On my boat the bravo actually rides a tad bit rougher than the T2 over chop but that's just the nature of the Phoenix hull. Any bit of stern lift makes it slap instead of cut through like normal. ...
  12. Replies
    8
    Views
    388

    If you're going to chick definitely fish at...

    If you're going to chick definitely fish at night. The big bass splash reschedule is the 22nd & 23rd.
  13. On my Phoenix I run a 25 T2 and a 27 bravo to the...

    On my Phoenix I run a 25 T2 and a 27 bravo to the same rpm and within a mph or 2 of each other depending on load. Run the bravo 3/4" higher than the T2 but it would run higher if I wasn't out of...
  14. Replies
    4
    Views
    401

    If you had it trimmed all the way down while...

    If you had it trimmed all the way down while fishing some oil probably seeped passed the rings. Especially if you were facing into rollers and the bow kept pointing up with each wave.
    Leave it at...
  15. Replies
    64
    Views
    2,512

    Warranty and piece of mind mostly. I know exactly...

    Warranty and piece of mind mostly. I know exactly how the engine was broken in, the service intervals, how well the hull has been treated and don't have to worry about a half assed wiring job on...
  16. Replies
    3
    Views
    510

    Fury's don't really slip that much out of the box...

    Fury's don't really slip that much out of the box unless you're trying to run it too high, on a boat that needs alot of lift, or on a SHO. On birds the fury 3's run best around 3-3.5 p2p from what...
  17. Replies
    6
    Views
    205

    Anyone made any progress on this? I did a search...

    Anyone made any progress on this? I did a search a see that g2n and g3n models seem to have a problem not being able to pause the scroll and move the cursor on their sonar and imaging pages. I'm...
  18. Replies
    17
    Views
    2,283

    I can't imagine there will be much change to the...

    I can't imagine there will be much change to the 5 series since the L boat is only a couple years old. At the most I'd say some console changes and a few more shiny chrome pieces and an even higher...
  19. Replies
    11
    Views
    353

    I turn mine off every time

    I turn mine off every time
  20. Replies
    29
    Views
    1,205

    I swear I don't think there's a jig made that I...

    I swear I don't think there's a jig made that I can't lose in rocks on the first cast!
  21. Replies
    36
    Views
    2,798

    I haven't ridden in both but I have driven a 921....

    I haven't ridden in both but I have driven a 921. So far it's the best riding boat I've been in. No jarring or hull slapping and responsive to throttle input to lift the bow over waves. I drove it on...
  22. Thread: Cooler mods

    by Wackyjig
    Replies
    19
    Views
    1,127

    Cooler mods

    Has anyone done any modifications to their cooler to make it hold ice a little better? I was thinking of putting thin weatherstripping around the top and a latch to keep the lid down and sealed....
  23. Replies
    11
    Views
    674

    Every hole is a community hole! That's how it is...

    Every hole is a community hole! That's how it is on Chickamauga ledge fishing.. Becoming that way bank beating too
  24. Replies
    47
    Views
    1,901

    I'll just wait till monday when everyone is so...

    I'll just wait till monday when everyone is so sunburnt and hungover they can barely leave the house
  25. Replies
    18
    Views
    949

    Fury comes on the majority of boats from the...

    Fury comes on the majority of boats from the factory and they perform decent enough that people don't bother to change them.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4