I’ll figure it out on my own. Place is dead... wealth of info on buying new overpriced stuff
Type: Posts; User: Kmorningstar01
I’ll figure it out on my own. Place is dead... wealth of info on buying new overpriced stuff
I’ve got an older power pole. CAme with no pump. I’m cheap so I try and pick things up and fix/ make it work. I’ve been reading and reading. Can I make the mercruiser tilt and trim motor/pump run my...
Using a deep cycle battery will cause that very quick as well.
Sorry this was fuel injectors
Air and fuel pressures with dead on what the manual calls for
so I’m looking at the sheets the company gave me. They say before cleaning they flowed 25ML at 20sec at 6000rpm. After they cleaned them the results went to 36ML at 20sec at 6000rpm. That’s almost...
I’m going to get a gauge to check the air and fuel pressures. I’ll report back with my findings
Spectrum marine in ft Myers. I think was the name. He’s a friend of a friend. Let’s not start the finger pointing game. I trust him and his work. Block was able to be honed.
I had them marked and labled. As did he when they returned.
Yeah I get that it’s bad but I’m scratching my head how a #2 failed his test but yet #3 piston was melted
Motor serial is 1B026973
Anyone an opti guru??
ive got an 05 115 3 cyl. Opti. Got motor with 2 low holes. Rebuilt motor with new pistons and gaskets. Fired up on stand and sounded great... Against better judgment i hung it on my boat... knowing I...