Search:

Little update for you.
Blew my lower unit out. Got a new one.
And got a 24 Bravo 1 XS.

Ran it today as well as the ot4 for comparison.

24 Bravo 1 XS 65.5@5750, 2.5" below pad.
Can hit 66...

Sports. You sent me a PM and it says i cant respond your inbox is full.

But yes these are GPS speeds i am posting and RPM from smartcraft monitor.

I just got the razor.
I don't have any of the same props that I had with the 8" plate except the 25 fury.
And I can't definitively comepare speeds. I've changed allot boats loaded different. Hard...

Ran the razor 3 again. I almost feel like I need to go deeper than 5.5"
At 9.5 trim I can hit about 62-63. I trim to 10 and it will go to 64 and start climbing to 65 and then the sound changes the...

In theory you can run higher prop shaft heights with longer jackplate with equivalent or less slip because further back the water is cleaner and not as turbulent and the water rises up off the back...

I really wanna try a bravo, fury 4, and razor 4

Yes old 8" jackplate much less gear in the boat as well.

I hit 69.1 by myself and 68.6 with my partner during a tourny with that teampest

I ran a tempest worked by croxton before I added the extra jackplate and it was my fastest prop. But I totally it at KY lake. I'll prob have it repaired soon and run it again.

I had a 24 trophy that I traded for the 25 razor3. The trophy was the worst prop. I could not get over 61 with it.

26
Others are 25

25 Razor 3 65@5350, 5.5" below pad, 10% slip
25 Fury 3 65@5500 4.5" below pad, 12% slip
26 Txp-ot4 67.5@5150 2.5" below pad, 6% slip, seems unlikely slip was actually that low, prop must have...

What prop shaft heights are you guys running.
I have a hydraulic plate so i can vary mine as im running. Right now all the way at the bottom is 5.625" below pad. And this is where im seeing my best...

I haven't tried the 25 fury yet.
I tried the 25 Razor 3 this weekend and determined i need to mount my engine lower on the jackplate. I got 61mph @ 5350 which was like 15% slip at mid jackplate...

I ran a 26 Fury with 2 people, full tank, livewells full. Tried all different jackpate heights and best i could get is 61@5100 thats about 15% slip.

I just got a 25 Razor 3 im going to try this...

Did u ever get updated speed, slip, and jackplate height numbers?

I am now running 14" Hydraulic plate. I messed up my best prop so now im playing with less than ideal props. Last week i was only...

No but I think I saved it. When I get back in town. If I remember I'll look on my old laptop.

i read an article one time where they claimed to run 80mph in a 216 coosa with a 250XB.
Not sure on prop or setback

What engine do you have?
I just added a hydraulic jackplate and more setback
I now have 14" setback.
Boat rides and seems to handle good.
I have taken all next week off work and i will be fishing...

I think a bravo would be a better prop for the 216 but i don't have one to try.

I have a Cobra 216 with 225ProXs with 10" Jackplate.
I am running a 25" Fury. I need more RPMs though. If i was running the same thing i would recommend a 24" or if you have an EFI i would...