Fishers of Men Maryland Division 2024 Schedule
4/6 Potomac - Smallwood
4/27 Upper Bay – Tydings
5/11 Upper Bay – Elk Neck
6/8 Potomac – Marshall Hall
6/22 Conowingo – Dorsey
Competitive...
Type: Posts; User: nightcaller
Fishers of Men Maryland Division 2024 Schedule
4/6 Potomac - Smallwood
4/27 Upper Bay – Tydings
5/11 Upper Bay – Elk Neck
6/8 Potomac – Marshall Hall
6/22 Conowingo – Dorsey
Competitive...
Fishers of Men Maryland Division 2024 Schedule
4/6 Potomac - Smallwood
4/27 Upper Bay – Tydings
5/11 Upper Bay – Elk Neck
6/8 Potomac – Marshall Hall
6/22 Conowingo – Dorsey
Competitive...
My Helix 12 DI G4 is still at 2.800 and my mega live is still at 1.200 and mega 360 at 1.070. Due to some family issues, I have not taken the time to update but my units all work well. With the...
I need to open a .usr file and delete some trails. Any idea what program will open a .usr file on a pc and allow editing? Thanks. Tom
Thank you Don and all for your wisdom on this system! Will do!
Can anyone explain how an inaccurate trim sensor reading on this model can affect the actual trim up and down function. I have heard from several reliable sources about issues with trim not going up...
UPDATE: made it home from NY. Boat is all dried out and has been stored inside. Trailered boat 20 minutes to the ramp and attempted to launch. Engine would not trim up and had difficulty even getting...
250 Pro XS 4 Stroke S/N 3B384284 on a 2023 Phoenix 921 Elite. After fishing for a while in the rain on Champlain, we started the engine and it immediately began trimming up on its own. We shut it...
Fishers of Men Maryland Division 2023 Schedule
4/8 Potomac - Smallwood
4/22 Upper Bay – Tydings
5/20 Upper Bay – Anchor
6/3 Potomac – Smallwood
6/17 Conowingo – Dorsey
Competitive Teams...
Fishers of Men Maryland Division 2023 Schedule
4/8 Potomac - Smallwood
4/22 Upper Bay – Tydings
5/20 Upper Bay – Anchor
6/3 Potomac – Smallwood
6/17 Conowingo – Dorsey
Competitive Teams...
Thanks, Wayne. Yes, I meant Helix 12. Unit functioned well today just slow at start up.
FYI...Mega Live is connected directly to the HDS 12 using a dongle. No other Humminbird units are networked.
First day out Mega Live worked fine. Today, when the Helix 12 was turned on, Mega Live showed as "disconnected" but after several minutes, it came on but had what I would describe as crosstalk at...
250 Pro XS Serial 2B087425 engine warning alarm only making faint sound sometimes when key on. It is otherwise inop. Where is it normally located? In the dash near the key switch? Is it a mercury...
I was able to set a waypoint using the 360 after turning 360 nav on. That was the extent of my success. My heading sensor is bad...new one on the way after a long session with CS. Then, 2 tiny screws...
Thank you. Yes, I meant Nav tab. I did not mount the sensor permanently yet as I was out trying to test it yesterday. With a compass, There is interference in most of the areas in the front of the...
No, it was not turned on. But now it is. But I don't have the Nav tab. Should it appear when there is an AS GPS HS heading sensor hooked up?
I just completed an upgrade to my electronics. I installed a Helix 12 Chirp DI+ G4N and a Mega 360 on the bow and added the heading sensor. The 360 imaging is working very nicely. The unit is not...
Beautiful!
Would the two HDS Gen 2 units need a structure scan module in order to link and share waypoints?
I have an HDS 7 Gen 2 bow and HDS 8 Gen 2 console. I have 2 chips. The front unit is reading off the console chip. But sometimes the unit glitches and causes the console unit to lose it's map reading...
Thank you but the link comes up as "not found."
Years ago I saw a video on how to make the 3 screen set ups give you half screen on the left with 2 windows on the right instead of the factory default which is 2 screens on top with a full width...
Does the Garmin Force trolling motor need any kind of external antennae or heading sensor or is it all in the unit? Thanks
Thank you. I read through a lot of the posts and it is tough for a newcomer to Humminbird to grasp all the details. I appreciate your knowledge and patience. After reading through the forums, I have...