Helix 5 + Minnkota US2 transducer in Terrova depth problems
I have Helix 5 for about 4 years. It was working perfect with the original transducer but connecting to new Terrova US2 I get only problems.
Depth reading in auto is out of whack ( 8' shows as 200' without any bottom)
If I set it manually to 50' it seems to be working fine, anything above is no go.
Another problem is that I get about 3/8 inch of blue on top all the time.
Onix in the same are working fine, and is off when using the Helix.
No change if the trolling motor is on or off.
Any help would be appreciated
Thanks