Where do you do your work? Lures,Rods etc...

http://i830.photobucket.com/albums/z...101_0448-1.jpg Jig Desk where the Magic Happends
http://i830.photobucket.com/albums/z...101_0450-1.jpg This is where weed guards,Rattles,eye's get put on and hook eyes get cleaned out
http://i830.photobucket.com/albums/z...101_0452-1.jpg There's just a bunch of buckets of lead head's and acc's for jigs and other baits I make.

There ya have it Lock Jaw Jigs HUGE shop as you can see LOL I cleaned just for BBC pics,I normally cant see the floor because of weed guard clippings,strands of skirt ect.,Thanks for checkin of where it all comes together! http://www.bassboatcentral.com/smileys/thumbsup2.gif

So that's where those fine jigs are made, looks good Frank http://www.bassboatcentral.com/smileys/thumbsup2.gif

For lack of a workbench living in a trailer. I have to turn handles on nice days.


http://www.rodbuilding.org/photopost...um/spiral7.JPG http://www.rodbuilding.org/photopost.../workspace.JPG

Figured you guys may like to see my new shop. It's 16'x12' & It's insulated on the 3 sun filled sides, but the back wall is not for hazard reasons using a torch, etc. I ran full electric in it, and it's air conditioned. It stays in the upper 70's during the day except the super hot days it stays around 80-82. http://www.bassboatcentral.com/smileys/sweating.gif Still have to finish the following:

- Insulation (2-3 pieces worth)
- Tank stand for 30 gallon test tank
- Shelves
- Range hood style ventilation
- Transferring all the stock out

http://i94.photobucket.com/albums/l9...1/SDC10137.jpg
http://i94.photobucket.com/albums/l9...1/SDC10138.jpg

Your place is too organized Michael http://www.bassboatcentral.com/smileys/Laugh.gif

my subterranean shop. I have a whole kitchens worth of old cabinets (1 and half kitchens to be precise) that will eventually go in here..... some day.

this is my mom's old PC - running linux as a glorified MP3 player now - hooked up to 150 watts of old-school, ear drum destroying, Pioneer acoustic power.
http://farm6.static.flickr.com/5250/...eeb905d538.jpg

wife says i have to sound proof the room before the cabinets go up (its just below the kitchen http://www.bassboatcentral.com/smileys/Laugh.gif )

work bench/wrapper
http://farm6.static.flickr.com/5289/...a014fe5485.jpg

turning station
http://farm6.static.flickr.com/5169/...c1b1cf3e5f.jpg

MY shop Thanks guys[imghttp://i1239.photobucket.com/albums/...2-07181709.jpg][/img][img]http://i1239.photobucket.com/albums/...2-07181725.jpg[/img][img][img]http://i1239.photobucket.com/albums/...2-07181719.jpg[/img] http://www.bassboatcentral.com/smileys/thumbsup2.gif [/img]

http://im1.shutterfly.com/media/47a1...D550/ry%3D400/
http://im1.shutterfly.com/media/47a1...D550/ry%3D400/

With the hours I've been working this has taken me most of the winter to get this set up and half way organized. Still needs a few things but it's close enough to start building a few again since we've started to slow down a little at work.

http://i256.photobucket.com/albums/h...0/DSCN0959.jpg

http://i256.photobucket.com/albums/h...0/DSCN0961.jpg

I had all of my fishing junk scattered all over the house and was building rods in 2 separate rooms. FINALLY I can be a little more efficient.

Here is mine. Can't get one pic to show everything cause it is a small room so here are a few.
http://i614.photobucket.com/albums/t...ff/shop001.jpg
http://i614.photobucket.com/albums/t...ff/shop002.jpg
http://i614.photobucket.com/albums/t...ff/shop003.jpg

Well the bench is in the garage finally. I have it stained in this pic, I still have 2 more coats of poly before it is done and I can get organized. Right now I have stuff everywhere and have no clue where anything is.


http://i992.photobucket.com/albums/a...s/IMAG0059.jpg

Ok Guys, you inspired me to finally get rid of the folding table and build a workbench, just for my tackle work. Here it is!
http://i48.tinypic.com/vyftj.jpg
http://i50.tinypic.com/15i5ljl.jpg

You guys obviously have a severe case of ocd. My workspace is so fd up at times I just build whatever i can get to. Nice work men.

I have a 6 foot folded table. Have the powder I use most of the time and a heat gun with the weed guards and skirting material and collars all on the table. I have yellow bins full of lead heads. and few files to file down the excess after i cut the sprue off

Here's where I spend way too much time:
Attachment 27233Attachment 27237Attachment 27238

holy shit! does your wife have any ideal how much money you have invested in this set up.:popcorn:i spend forty dollars on a gallon of plastic and mine thinks im nuts..

Quote:

---

Originally Posted by worm-maker

It needs a big time cleanup :embarassed: :embarassed:

http://i128.photobucket.com/albums/p...1/DSCN1410.jpg

http://i128.photobucket.com/albums/p...1/DSCN1411.jpg

---

I waited till it was clean for the pic

Attachment 33559Attachment 33560Attachment 33561

I am going to dive into painting crankbaits to see if I like it so here is my first attempt at a paint booth/work station.
Attachment 34191

Mounted a regulator/filter to the side of the box

Attachment 34192

Added an airbrush holder because I hear they are easily knocked onto the floor

Attachment 34193

Mounted a set of helping hands to secure the bait

Attachment 34194

Rotisserie motor mounted inside box which will run a turning wheel mounted outside the box for drying baits

Attachment 34195

Strip of hangers to hang baits between coats

Attachment 34196

Front view

Attachment 34197

See anything I missed or that I need to add? Exhaust fan?

My workshop is my loft above my garage.

http://im1.shutterfly.com/media/47a3...D720/ry%3D480/
http://im1.shutterfly.com/media/47a3...D720/ry%3D480/