1987 Astroglass 166V Bass Boat Restoration - with Youtube Videos!!!
I picked up my latest winter project, a 1987 Astroglass166V to restore... should be an adventure!
Here's the link to the first couple videos:
https://youtu.be/1bKq0pomDXI
https://www.youtube.com/watch?v=rmrNXwmE8Bk
This thing overall is in pretty good shape with a good trailer under it. No motor included in the sale, but I have a motor on my pontoon I'm going to upgrade and them move the motor from the pontoon to the bass boat. here's some pictures:
http://forums.iboats.com/filedata/fe...3579&type=full
Motor not included... :-(
http://forums.iboats.com/filedata/fe...3607&type=full
http://forums.iboats.com/filedata/fe...3607&type=full
http://forums.iboats.com/filedata/fe...3608&type=full
http://forums.iboats.com/filedata/fe...3613&type=full
So after deciding to part the hull like the red sea I got to work. Took a couple reference photos before removing the rub rail rope, the rail removing dozens and dozens of screws and then removing the screws holding the hull and cap together.
http://forums.iboats.com/filedata/fe...0026&type=full
http://forums.iboats.com/filedata/fe...0055&type=full
http://forums.iboats.com/filedata/fe...0090&type=full
Don't know what exactly I'll do with the rub rail come assembly time, but just in case...
http://forums.iboats.com/filedata/fe...0102&type=full
Here's the floor in the lower deck section as I began cutting and separating.
http://forums.iboats.com/filedata/fe...0198&type=full
http://forums.iboats.com/filedata/fe...0252&type=full
And the fun begins...
http://forums.iboats.com/filedata/fe...0299&type=full
http://forums.iboats.com/filedata/fe...0312&type=full
http://forums.iboats.com/filedata/fe...0336&type=full
http://forums.iboats.com/filedata/fe...0353&type=full
And a giant garbage bin full of foam, fiberglass and toothpicks.
http://forums.iboats.com/filedata/fe...0371&type=full
So I'm working towards separating the two halves and having a lot of problems. It seems to be bonded at several points through the boat under storage compartments and such. Anyone got any ideas on what to cut and where? Has this ever been done on an '87 166v?
This picture is facing aft from the port side looking towards the starboard aft corner.
http://forums.iboats.com/filedata/fe...0644&type=full
Same setup, just less zoomed.
http://forums.iboats.com/filedata/fe...0654&type=full
More of the center under the splash well.
http://forums.iboats.com/filedata/fe...0682&type=full
And a more close up picture of the splash well area.
http://forums.iboats.com/filedata/fe...0693&type=full