Trying to get in contact with the company that makes the "boat board" step system. Anyone know how I can get in touch with them?
I have sent several emails to the address on the web sight but no answer. Thanks.
Printable View
Trying to get in contact with the company that makes the "boat board" step system. Anyone know how I can get in touch with them?
I have sent several emails to the address on the web sight but no answer. Thanks.
http://www.bbcboards.net/attachment....d=264307&stc=1 Just make one..this one holds my 225lbs easy with both feet on it.. I could add pole to hold onto if needed.
If you can't reach them I recommend Trick Step
What boat do you have? Many have the front eye set in different places, some are hard to reach when onboard and some aren't when trying to hook up the winch strap. This was the deciding factor when I bought my Easy Step system. I fish a lot by myself and sure makes getting in and out of the boat easy. I have a 98 TR20 which sets high off the trailer in the front and the winch eye sets back enough that I can't reach it when on board.
I did not like the Ranger Steps because they stick out too much on the side. I get into some really tight spots and was afraid the step may hit the back of the truck. I had these built and I made the grab bar out of 3/4 inch pipe. The grab bar does not have much of a finished look but it sure works well. The top step bolts under the winch and the lower step bolts to the jack stand so there is no welding or drilling and the install time is about 15 minutes. I too fish a lot alone and these steps are perfect loading and unloading.
Thanks to all who responded.