A few rock piles from a trip out earlier in the week.
http://www.bbcboards.net/attachment....d=309500&stc=1
http://www.bbcboards.net/attachment....d=309501&stc=1
http://www.bbcboards.net/attachment....d=309502&stc=1
Printable View
A few rock piles from a trip out earlier in the week.
http://www.bbcboards.net/attachment....d=309500&stc=1
http://www.bbcboards.net/attachment....d=309501&stc=1
http://www.bbcboards.net/attachment....d=309502&stc=1
looks like some really nice isolated piles of rocks. Good find.
Nice. Which transducer?
Just the standard LSS-2
:bows:
IS this a Gen2 or Gen3?
This is from a Gen2. I run 2 x Gen2 12's on the console and a single Gen3 12 on the bow. The Gen2's are connected to the LSS-2 xducer and my front Gen3 runs off a spotlight scan HD xducer.
Nice pics! Would love to know what settings you are running.
looking good !
I'd tell you, but my next trip out is always a bit different. I continuously play with my settings based on lake clarity, depth and what I am doing (ie. scanning, dropshot, ect ect). Xducer position/level is key and then from there start with the preloaded settings and adjust from there. It doesn't take much to achieve these clear pics.
Great pics Chris... feel free to comment on my post about this post.
IS THIS RUNNING THROUGHT THE LSS2 HD BOX OR PLUGGED RIGHT IN THE BACK OF THE HEAD UNIT?
Straight to the back of the unit.
so you have any shots with the 800khz setting?
I rarely run 800......455 always works the best for my application.
Great pics. Thanks
Impressive images. I run 9T’s Gen 2 and don’t come remotely close to images like this. Would love to though
is it just acceptable on the hds units to have that interference directly underneath the boat?
No