-
Fish
Bought a new Element this Spring. Had it out 5 times .Really easy to operate from one screen to the next. Like it a lot but to my knowledge I haven't marked a fish on it yet. Sure seems like I should have . On down vision I've seen a few white spots but they are very,very small. Do I have my setting wrong ? I have it on "automatic" -- Running it usually 10 to 20 feet in depth . Any suggestions ? Thanks
-
1 Attachment(s)
The Element is one of the best out there for seeing fish on side and down
-
1 Attachment(s)
-
I should have mentioned that the problem I'm having is with sonar--no arcs -no red indicators-just bottom
-
-
-
I did not see anything when researching the Element units regarding an ethernet port. Do you know whether or not you can share waypoints and sonar between the element units?
-
There also is an upgrade available to upgrade to Lighthouse III, and it's FREE !! You'll like the difference !!
-
I'm the one who started this thread. I'm still not seeing fish- 9 times out. I've adjusted sensitivity, gain ,color brightness and no fish . I can't be that unlucky that there are no fish under me. I'm wondering if the transducer is set to a very narrow angle so that when fishing 10 feet deep I'm missing the fish .I don't see fish at 20 feet deep either. On the Element, can I adjust the angle ? If so, how ? I'm not smart enough to figure out how to get into that setting. Which options do I choose ? Can you help me please. thanks
-